/
DC500
Overview
The Dichen DC500 is the latest high-performance video fuser, integrating both HDMI 2.1 and DP 1.4 interfaces for ultimate flexibility. Updated firmware supports over 95% of current displays, with manual flashing available for ongoing updates. It delivers enhanced stability, broader compatibility, and native high-frame-rate output with zero compression — ideal for dual-PC DMA setups, streaming, and competitive gaming.
HDMI 2.1 Specifications
- 1920×1080 @ 540Hz
- 2560×1440 @ 355Hz
- 3840×2160 @ 158Hz
- Fully backward compatible, including ultrawide monitors
- Recommended GPU: Nvidia GTX 3060 / AMD RX 6500XT or better
- Monitor must support full-bandwidth HDMI 2.1 FRL (48Gbps)
- Secondary PC CPU: 6 threads or higher
DP 1.4 Specifications
- 1920×1080 @ 480Hz
- 2560×1440 @ 320Hz
- 3840×2160 @ 160Hz
- Backward compatible; ultrawide supported
- Secondary PC CPU: Minimum 6 threads or higher
Extreme Performance Benchmarks
- 4K @ 144Hz, 2K @ 300Hz, 1080P @ 480Hz (standard)
- With AMD 6000 series or newer: 4K @ 160Hz, 2K @ 360Hz, 1080P @ 600Hz
Note: Nvidia cards may be limited by DSC compression protocols — this is a GPU limitation, not a fuser issue. 3K resolutions are supported but official benchmarks are unavailable due to niche sizing; users report up to 180Hz with integrated graphics on the secondary PC.
Requirements
- Secondary PC with HDMI 2.1 or DP 1.4 output
- Monitor supporting the desired resolution/refresh rate (HDMI 2.1 FRL or DP 1.4 HBR3 recommended for max performance)
- Compatible GPU (see specs above)